NEW Magnetek FLEX-4EX2-09-2T Overhead Crane Hoist Radio Remote Control System

Description

NEW Magnetek FLEX-4EX2-09-2T Overhead Crane Hoist Radio Remote Control System
Kit Includes:
2 (two) Flex transmitters with four 2-speed pushbuttons (2-motion/2-speed, E-stop, and Off/On/Start), 1 (one) Flex receiver, TX label sheets, waist belt, vinyl tx covers, pre-wired output cable, and "AA" batteries, key switch, and necessary mounting hardware.
System Applications:
Ideal for use in material handling, overhead crane, mobile hydraulic and industrial applications.
System Includes:
2 (two) Flex transmitters with four 2-speed pushbuttons (2-motion/2-speed, E-stop, and Off/On/Start), 1 (one) Flex receiver, TX label sheets, waist belt, vinyl tx covers, pre-wired output cable, and "AA" batteries, key switch, and necessary mounting hardware.
System Model No.:
FLEX-4EX2 (Replaces Older Generation - Model No. 0-FLEX-4EX-1S)
Frequency Range:
433MHz~434MHz.
Frequency Deviation:
12.5 KHz
Number of Channels:
62 channels
Modulation:
Digital frequency modulation based on Manchester Code, 20bit address, and 32bit CRC Parity Check and Hamming Code
Encoding / Decoding Reference:
Microprocessor-controlled
Transmitting Operating Range:
>100 Meters / 328 Feet
Frequency Control:
Synthesized PLL (Phase Lock Loop)
Receiver Type:
Frequency Auto Scanning
Antenna Impedance:
50 ohms
Responding Time:
60 Milliseconds (average)
Transmitting Power:
1.0mW
Receiver Sensitivity:
-116dBm
Transmitter Operating Voltage:
3.0VDC
Transmitter Power Consumption:
5~22mA
Output Contact Rating:
250VAC @ 8A
Receiver Supply Voltage Options:
110~120VAC @ 50/60Hz (standard)
24VAC @ 50/60Hz (optional)
42VAC @ 50/60Hz (optional)
48VAC @ 50/60Hz (optional)
220~240VAC @ 50/60Hz (optional)
380~400VAC @ 50/60Hz (optional)
410~460VAC @ 50/60Hz (optional)
9~36VDC (optional)
Receiver Power Consumption:
7.0 VA
Enclosure Rating:
IP-66
Enclosure Type:
NEMA-4X
Operating Temperature:
-25°C ~ 75°C / -13°F ~ 167°F
Transmitter Dimension:
5.43in (L) x 2.71in (W) x 1.33in (H) / 138mm (L) x 69mm (W) x 34mm (H)
Receiver Dimension:
7.08in (L) x 5.90in (W) x 3.22in (H) / 180mm (L) x 150mm (W) x 82mm (H)
Transmitter Weights:
192g / 6.8oz
Receiver Weights:
2.1kg / 4.6lb (includes output cable)
Two "AA" alkaline batteries provide more than 100 hours of operation.
Unique I-CHIP design allows information and settings to be transferred between transmitters
Ergonomically designed to be compact and lightweight to prevent operator fatigue
Equipped with more than 200 programmable functions to suit all types of applications
Reliable pushbuttons feature gold-plated contacts and are rated for more than one million press cycles. The defined snap-action steps provide positive tactile feedback even while wearing gloves
Easy one-handed operation
Enclosures are made from industrial-strength nylon and fiberglass composite materials for extra durability
Each Flex EX2 system has over one million unique identification codes (20 Bit) and never repeats
Advanced microprocessor controls with 32 bit CRC and Hamming Code provide ultra-fast, safe, precise and error-free encoding and decoding