2 sets F24-6D Dual Speed Radio Hoist Industrial Wireless Crane Remote Control

Description

Package Included :
1 set: 2 transmitters, 1 reciver, 220V/50Hz AC power suppy
1 set: 2 transmitters, 1 reciver, 48V/50Hz AC power suppy,
exclude channels 131 and 134 and overlaping of two sets described above
Application :
Bridge Crane / Overhead crane / Chain Hoist / Monorails / Concrete Pump Truck / Mobile Lifting / Tower Crane
Specifications :
Transmitter
Number of function buttons
6
x
one step
/
dual step
buttons
(Up/ Down, East/ West, South/ North)
Other buttons
1 x STOP impact switch, 1
x Start button, 1x safety key
Material
Glass-Fiber PA
Dimension
156*61*51mm (6.1*2.4*2.0 in.)
Weight
255G (without batteries)
Protection Class
IP65
Frequency range
VHF: 310~331MHz; UHF: 425~446MHz
Transmitter power
Less than or equal to 10dBm
Safety code
32bits (4.3 billion)
Temperature range
-40~85 degrees Celsius (-40~185 degrees Fahrenheit)
Control distance
Approx100m (200 meters is customized)
Receiver
Receiver power supply
AC/DC12V, AC/DC18~65V, AC/DC65~440V
Material
Glass-Fiber PA
Dimension
210*162*107mm (8.3*6.4*4.2 in.)
Weight
1220G
Protection Class
IP65
Temperature range
-40~85 degrees Celsius (-40~185 degrees Fahrenheit)
Frequency range
VHF: 310~331MHz; UHF: 425~446MHz
Receiver sensitivity
-110dBm
Cable length
1.65 meters
Safety code
32 bits (4.3 billion)
Control distance
Approx100m (200 meters is customized)
Features :
1, Up/down, East/ West, South/ North can be programmed to interlock or non-interlock.
2, Transmitter and receiver labels use laser engraving technology. Waterproof, wear-resistant, clear writing, avoiding the important information is missing in harsh environments as codes and other issues. To provide more superior service for future use.
3, Special button materials and high-quality switches
4, Power supply alarm indicator
Note :
The LED on the front of the transmitter indicates the condition of the batteries.  It will flash green during operation if the battery power is sufficient and will flash red if the battery power is low. If the LED is flashing red, or if the operation becomes erratic, or will only work from a short distance, replace both batteries with new AA alkaline batteries.
36V 220V 380V AC ; 50-60HZ
---Professional solution for industrial remote control
TELEcontrol ( UTING)
12V or 18-65V & 65-440V AC DC
---Professional solution for industrial remote control
On Nov 10, 2022 at 01:45:11 PST, seller added the following information: